← Back to blog
MiniMax M3.1 Flash vs DeepSeek V4.1 Flash: Price, Speed, Scores

MiniMax M3.1 Flash vs DeepSeek V4.1 Flash: Price, Speed, Scores

Alex Morgan

By Alex Morgan

MyClaw Editorial

Compare in MyClaw

Compare MiniMax M3.1 Flash and DeepSeek V4.1 Flash on your own work

Give both models the same task and compare the results, speed, and usage.

AI Takeaway

  • How are these two budget models positioned? Both are Flash-class models with a 1M-token window, built for agents and coding. MiniMax rolled out MiniMax-M3.1-Flash on October 19, 2026, while DeepSeek's deepseek-flash endpoint now runs the DeepSeek-V4.1-Flash-1017 snapshot from October 17, 2026 (per each vendor, as of October 20, 2026).
  • What about list prices? MiniMax bills $0.15 for every million tokens read and $0.60 for every million written, whatever the hour. DeepSeek asks $0.30 and $1.20 in weekday peak windows and half that otherwise (vendor-stated; dated October 20, 2026).
  • Which does better in independent testing? Artificial Analysis put DeepSeek V4.1 Flash at about 45 on its Intelligence Index for roughly $0.26 per task, and MiniMax M3.1 Flash in the low 40s (42 or 43, by report) for roughly $0.22 (third-party, via VentureBeat, October 19, 2026).
  • Which one has open weights? DeepSeek has posted its weights to Hugging Face, licensed MIT. MiniMax says its weights will follow later.
  • Can I run both in MyClaw? Yes. MyClaw carries both, which means one identical job can go to each and you can see which handles it better.

Head-to-Head Specs at a Glance

Here are the essential MiniMax M3.1 Flash vs DeepSeek V4.1 Flash numbers, taken from each vendor's documentation (vendor-stated, as read October 20, 2026).

SpecDeepSeek V4.1 FlashMiniMax M3.1 Flash
API namedeepseek-flash (snapshot DeepSeek-V4.1-Flash-1017)MiniMax-M3.1-Flash
Latest releaseOctober 17, 2026 snapshotOctober 19, 2026 launch
Window1M tokens (both vendors)Same 1M
Longest reply384K tokensNot stated
What it can readText, plus image understandingText, pictures and video clips
ReasoningOn by default; a non-thinking mode existsAlways on, effort from low to max
API stylesOpenAI and Anthropic formatsOpenAI and Anthropic formats
WeightsMIT license on Hugging FaceDue later
Concurrency2,500 listedNot stated in sources read

Two practical differences: DeepSeek lets you switch reasoning off for quick replies, while MiniMax only lets you dial it down. And DeepSeek's older names, deepseek-v4-flash and its vision preview, still work but now route to the 1017 snapshot. For a fuller profile of the MiniMax side, see our M3.1 Flash review.

MiniMax M3.1 Flash: Redefining Agent Performance and Cost - MiniMax  Research | MiniMax

Price and the Clock: Flat Rates vs Peak and Off-Peak

For MiniMax M3.1 Flash vs DeepSeek, the biggest pricing difference is timing. MiniMax bills the same rate around the clock, while DeepSeek splits the week into peak and off-peak hours. Every figure here comes from the vendors (October 20, 2026).

Per 1M tokensDeepSeek peakDeepSeek off-peakMiniMax, any time
Input (no cache)$0.30$0.15$0.15
Output$1.20$0.60$0.60

DeepSeek defines peak as two weekday blocks, one in the early UTC morning (one to four o'clock) and one from six to ten o'clock UTC; Chinese public holidays count as off-peak. Every other hour, including weekends, bills at half. Both vendors also discount cached input, though each describes the cache differently, so check the details on each pricing page rather than reading one against the other.

Our own arithmetic, at list prices with no caching: an agent run that reads 500,000 tokens and writes 50,000 would cost about $0.105 on MiniMax at any hour, about $0.21 on DeepSeek during peak hours and about $0.105 off-peak. Repeat that job 1,000 times a month and the gap between MiniMax and DeepSeek peak pricing reaches roughly $105. In short, DeepSeek off-peak matches MiniMax's flat list rates, and peak runs double.

Two more cost notes: DeepSeek sells separate Search and Fetch APIs at $0.75 per 1,000 successful requests, and says server-side tool calls through supported agent tools start billing on November 1, 2026. On the third-party side, Artificial Analysis put the average evaluation task at about $0.22 on MiniMax and about $0.26 on DeepSeek (via VentureBeat, October 19, 2026). To see DeepSeek's rates set against Google's, read our DeepSeek and Gemini Flash pricing comparison.

DeepSeek V4.1 Flash Launches With Lower Prices and Native Vision

Benchmarks: Vendor Tables, Then the Shared Third-Party View

MiniMax-Reported Scores

TestWhat it measuresMiniMax M3.1 Flash
CyberGymVulnerability discovery82%
BankerToolBenchFinance tasks with tool chains76.2
OSWorld V2Computer operation61.7
DeepSWE v1.1Software engineering73.7%

Source: MiniMax, October 20, 2026.

DeepSeek-Reported Scores

TestWhat it measuresDeepSeek V4.1 Flash (1017)
Terminal-Bench 4.0Command-line tasks42.3
HLE, no toolsHard reasoning questions42.6
DeepSWE v1.1Software engineering77.0

Source: DeepSeek, October 20, 2026. DeepSWE v1.1 appears in both tables, but each company ran it with its own setup, so we do not rank the two on it.

Artificial Analysis Head-to-Head

The only shared measurement we found comes from Artificial Analysis (third-party, via VentureBeat, October 19, 2026). DeepSeek V4.1 Flash scored about 45 on the Intelligence Index and MiniMax M3.1 Flash about 42 to 43. MiniMax came out ahead on Humanity's Last Exam, 48% to 43%, while DeepSeek edged it on the CritPt physics test, 24% to 22%. Artificial Analysis also reported that MiniMax used fewer output tokens during testing but showed a high tendency to answer wrongly rather than admit uncertainty. More DeepSeek context sits in our matchup with Moonshot's Kimi K3.

Speed, Efficiency and Accuracy Trade-Offs

MiniMax gives concrete speed figures: a top output rate past 200 tokens each second, typical (median) rates over 170, and close to three times the inference speed of the model it replaces (vendor-stated, October 20, 2026). DeepSeek says the 1017 snapshot finishes agent work in fewer steps and less time than the September release, without putting a number on it (vendor-stated).

For agents, speed is only half the picture. A quick model that guesses can cost more in rework than a slower one that admits doubt, which is why the third-party accuracy note on MiniMax matters for research and fact-heavy tasks. DeepSeek's higher concurrency limit and off-peak pricing suit large overnight batches, while MiniMax's flat rate makes daytime spend easy to predict. Our M3.1 Flash vs M3 comparison shows how much MiniMax's speed changed within its own lineup.

Compare in MyClaw
Compare MiniMax M3.1 Flash and DeepSeek V4.1 Flash on your own work

Give both models the same task and compare the results, speed, and usage.

Strengths and Weak Spots Compared

Pros: DeepSeek V4.1 Flash

  • Open MIT-licensed weights today.
  • Leads on the third-party index.

Cons: DeepSeek V4.1 Flash

  • Peak-hour rates double the off-peak ones.
  • Image input only, no video.

Pros: MiniMax M3.1 Flash

  • Flat rate at every hour.
  • Accepts video clips, not just pictures.

Cons: MiniMax M3.1 Flash

  • Weights not out yet (vendor-stated).
  • Third-party tests flag frequent wrong guesses.

Which One to Choose

Our judgment, based on the figures above (not our own testing):

  • Predictable daytime budgets or video input: MiniMax M3.1 Flash.
  • Self-hosting now, or big off-peak batch jobs: DeepSeek V4.1 Flash.
  • Fact-heavy answers: lean toward DeepSeek's stronger third-party index, and add a review step either way.
  • Fast replies without reasoning overhead: DeepSeek, since its non-thinking mode can be switched on.

Still weighing DeepSeek V4.1 Flash vs MiniMax M3.1 Flash? Run both through the same 10 to 20 tasks from your real workload and score each on correctness, time and total tokens. A leaderboard winner can still stumble on your prompts or file types. Also log when each job ran: with DeepSeek, the same task can cost twice as much at 07:00 UTC on a Tuesday as it does on a Saturday, so timing belongs in any fair cost comparison. Then repeat the check after the next snapshot or release, because both vendors are updating these models quickly.

Chat with MiniMax M3.1 Flash
Chat with DeepSeek V4.1 Flash

Compare the Two Flash Models Head to Head in MyClaw

All of the above narrows the field, but what actually matters is which model does better on your tasks, and that is easy to check in MyClaw. MyClaw hosts an always-on agent on top of OpenClaw or Hermes; message it from Telegram, WhatsApp or your inbox, or use the web app. The service works with most popular models, both of these Flash options among them.

Get Started

Curious how the agent layer works? Try our OpenClaw explainer and the Hermes primer.

  1. Register for MyClaw and launch the agent.
  2. Select MiniMax M3.1 Flash, listed as MiniMax-M3.1-Flash, and hand it one real job from your current workload.
  3. Change the model to DeepSeek V4.1 Flash, send the same job, and weigh the two answers.

Conclusion

On paper, these two budget models sit close together. DeepSeek V4.1 Flash leads on the shared third-party index, offers open weights now and halves its rates outside peak hours. MiniMax M3.1 Flash answers with a single flat rate, video input and high self-reported marks on agent and security tests, though independent testing warns about overconfident answers. Neither one wins outright, so match the choice to when you run jobs, what you feed them and how much you can check the output.

Compare in MyClaw

Compare MiniMax M3.1 Flash and DeepSeek V4.1 Flash on your own work

Give both models the same task and compare the results, speed, and usage.

MiniMax M3.1 Flash vs DeepSeek V4.1 Flash: Price, Speed, Scores | MyClaw.ai